Send Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
(Total 12 Products for Aero Instrument Panel Parts)
Aviation Cutlery Tray Plastic Injection Mould
Aviation Cutlery Tray is one of our Airline Tableware Mold making cases. The products are mainly used to meet the dining needs of flight attendant and passengers. The mould base steel is S50C, mold insert steel is 2083, 1*4 cavities, and surface finish of the cavity is polish. We adopted the gate way of cold runner...
We have extensive expertise in mold making for PEEK Mould. Due to the good heat resistance of PEEK material, the temperature span during injection molding usually needs to be between 320°C and 390°C. The temperature requirements of PEEK molds are also relatively high, often between 140 °C and 180 °C. The mold steel we...
Aircraft Reading Light Plastic Mold
The aviation reading light mold is a mold for functional parts of the aircraft, which can meet the reading lighting needs of passengers on the aircraft. The mold uses high-quality S136 steel, and it can reach more than 500,000 shots under proper maintenance. The product is made by POM material, the appearance is...
Aero Interior Parts Kit Aviation Injection Mold
Aviation seat armrest mold is one familiar project in Aero Interior Parts Mold category. Mold base steel is S50C, mold insert steel is S136 and the mold life can reach 500,000 shots or more. We make texture surface finish for the cavity when in mold making, used to enhance the texture of product appearance. In...
Aero Injection Molds for Aircraft Structural Components
The Aero
Injection Mold for Aero Structural components is mold making and injection molding by our company. It is made of high-quality mold insert steel H13 which hardness can reach HRC48-52. The
mold cavity is 1*1. And the mold life can reach 500,000-1,000,000 shots when
the mold is properly maintained. The surface...
Aero Functional Parts Plastic Injection Mold
Aero
functional parts plastic injection mold making, customized aviation seat
injection molding processing, precision injection mold manufacturing. Relying on
superb technology, advanced equipment, strict management system, fine
manufacturing process, stable product quality, and guaranteed delivery time. Every...
Aero Injection Moulding For Airplane Wings Parts
This is an aero injection moulding for airplane wings parts designed and produced by our company. Aero structural components, often referred to as aerospace structural components, are crucial parts used in the construction and assembly of aircraft, spacecraft, and other aerospace vehicles. These components are...
Custom Aircraft Functional Parts Plastic Injection Mould
Aviation reading light is one of our Aero Functional parts molds case. The product is mainly used on the plane to meet the reading or other light needs of passengers. The mold steel is S136, which can be reached mold lifespan to 500,000 shots or more if properly maintained. We use ABS material when in injection...
Aero Wings Structural Parts Mould
Aircraft wing parts are one of the most important parts of the plastic parts of the aircraft. This wing mold uses S136 steel to meet the requirement of a life span more than 500,000 shots. ABS material is commonly used in the production of aircraft plastic parts. It has high performance, high hardness and high melting...
Aero Back Rest Parts Plastic Injection Mold
Aviation seat parts are assembled from various plastic parts. The seat back mold is one of the plastic parts of aviation seats. Mold steel we used S136, the mold life requirement can be reached more than 500,000 shots. In the production of aviation plastic parts, PC is commonly used material. This material has good...
Aero Tail Parts Injection Moulding
Aircraft wing parts are among the most important plastic components of an aircraft. This wing mold is made by using S136 steel, which can fit the requirement of a life span of over 500,000 shots. In the production of aircraft plastic parts, ABS material is commonly used due to its high performance, high hardness, and...
Dental Care Powerflosser Medical Molds
This case is a mold for oral care products - a tooth rinser mold. Composed of multiple plastic parts, we open the mold according to the drawings provided by our customer. We made separate molds for the housing body, nozzle, and other plastic components. The final product has been affirmed by our customers. We used H13...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Send Inquiry
Ms. Linda
Tel:86-0769-82289418
Fax:86-0769-82289428
Mobile Phone:+8613580800428
Email:linda@hongkemould.com
Address:No.6, Xiangshan Road, Jichiling, Dalingshan town, Dongguan, Guangdong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.